ILX LIGHTWAVE FPM-8210H REPAIR and ILX LIGHTWAVE FPM-8210H CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ILX LIGHTWAVE FPM-8210H. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE FPM-8210H Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   ILX LIGHTWAVE FPM-8210H   Description / Specification:    
ILX LIGHTWAVE FPM-8210H Single Channel Optical Power Meter

The ILX Lightwave FPM-8210H Fiber Optic Power Meter has a single input port for both connectorized and bare fiber measurements. Virtually insensitive to polarization state or to pattern changes from fiber orientation, these meters deliver repeatable high resolution results. ILX Lightwave engineered the FPM-8210H for the production test workstation. The innovative fiber optic head design makes reliable fiber endface positioning a routine task, whether or not the fiber has a connector. With the CA-120 Bare Fiber Adapter, this meter is compatible with either ILX Lightwave or Agilent bare fiber holders.
Specifications.

Wavelength Range: 800 to 1650 nm.
Power Range: -50 to +30 dBm.
Damage Threshold: >+40 dBm.
Accuracy Reference Conditions: ±2.5%.
Accuracy Operating Conditions: ±5.0%.
Polarization Dependent Response: ±0.002 dB, typical.
Measurement Repeatability: ±0.003 dB, typical.
Sensor Type: InGaAs.
Noise: <=500 pW p-p (1200 at 1630nm) typical <250pW p-p at 1310 and 1550 nm.
Temperature Coefficient: Typical ±0.2%/°C.
Linearity: ±0.04 dB, ±500 pW (-40dBm to 30dBm).
Analog Output Bandwidth: Typical 0 to 10 Hz typical, Voltage: 0 to 10V, Impedance: Typical 1000 ohm.



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your ILX LIGHTWAVE FPM-8210H REPAIR and/or ILX LIGHTWAVE FPM-8210H Single Channel Optical Power Meter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: